The key is to look for a cabinet with good structure and pleasing lines - then consider the possibilities. This cabinet caught my eye because it is horizontal in shape rather than the vertical radio cabinets that I typically find. That detail in itself held potential and promise - add in those wonderfully curved legs and it had me at hello.
Note this cabinet has a top that lifts open on hinges and a front door that tilts down - typical for this style of cabinet, however, problematic for practical use. The first act of business was to secure the front door and make it stationary - I did that by securing both ends with nails that will be covered by the finish coat of paint. By securing the front and taking out the tilting hardware from the interior, I have now created a blanket chest of sorts.
I then filled in the hole in the front where the handle used to be with paintable wood putty - there is no need for a handle that has no purpose. Next, I added a piece of trim to the bottom of the front board to hide where the hinges used to be (this was a piece of trim saved from a previous project so be sure to save odds and ends that might come in handy later) which added a nice detail of interest.
I then filled in the hole in the front where the handle used to be with paintable wood putty - there is no need for a handle that has no purpose. Next, I added a piece of trim to the bottom of the front board to hide where the hinges used to be (this was a piece of trim saved from a previous project so be sure to save odds and ends that might come in handy later) which added a nice detail of interest.
No comments:
Post a Comment